If you own a Minnesota dealership selling farm equipment or heavy and utility equipment, two Minnesota statutes write terms into your agreement with the manufacturer whether or not the agreement repeats them. The heavy and utility equipment definition names equipment used in “construction,” “trucks and truck parts,” and equipment for “mining or forestry applications” (Minn. Stat. § 325E.068, subd. 2), so an industrial line is covered only if it fits that definition. The manufacturer needs good cause to end, refuse to renew, or substantially change the competitive circumstances of your dealership agreement. Unless it relies on one of seven listed events, such as bankruptcy or abandonment, it must also give written notice and a chance to cure before a termination, cancellation, or nonrenewal. A termination for missed market penetration requirements still gets both. When the agreement ends, a heavy equipment manufacturer, or the supplier of a farm implement dealer that agreed to keep its stock, must buy back qualifying inventory and parts. A manufacturer that breaks these rules faces a damages and injunction action.

The governing law is statute, read with three Minnesota appellate decisions. Farm equipment falls under the Minnesota Agricultural Equipment Dealership Act, and heavy and utility equipment under parallel sections (325E.068 to 325E.0684), both in Minnesota Statutes chapter 325E. This page covers what those statutes give you as the dealer. The general rules for supply agreements outside these statutes are part of Minnesota contract law.

What Counts as a Covered Equipment Dealer Agreement in Minnesota?

A covered dealer agreement is one under which you buy equipment from a manufacturer and resell it, and it may be “an oral or written agreement of definite or indefinite duration” (Minn. Stat. § 325E.061, subd. 5; Minn. Stat. § 325E.068, subd. 5). Which statute applies turns on what you sell.

  • Farm equipment. Sections 325E.061 to 325E.065 may be cited as the Minnesota Agricultural Equipment Dealership Act (Minn. Stat. § 325E.066). Farm equipment includes “tractors, trailers, combines, tillage implements, balers, skid steer loaders, attachments and repair parts for them,” among other equipment used in agriculture (Minn. Stat. § 325E.061, subd. 2). A dealer is a business “engaged in acquiring farm equipment from a manufacturer and reselling the farm equipment at wholesale or retail” (Minn. Stat. § 325E.061, subd. 4).
  • Heavy and utility equipment. Sections 325E.068 to 325E.0684 cover construction equipment such as “excavators, crawler tractors, wheel loaders, compactors, pavers, backhoes, hydraulic hammers, cranes, fork lifts, compressors, generators, attachments and repair parts for them” (Minn. Stat. § 325E.068, subd. 2). The same subdivision covers trucks and truck parts and “equipment used for, or adapted for use in, mining or forestry applications” (Minn. Stat. § 325E.068, subd. 2). A “truck” excludes “a pickup truck or van with a manufacturer’s nominal rated carrying capacity of three-fourths ton or less” (Minn. Stat. § 325E.068, subd. 6).

The “manufacturer” bound by the heavy equipment statute includes a business “engaged in the manufacturing, assembly, or wholesale distribution of heavy and utility equipment as defined in subdivision 2” (Minn. Stat. § 325E.068, subd. 3). The farm statute’s definition reaches a successor, including “any purchaser of assets or stock” (Minn. Stat. § 325E.061, subd. 3). Farm implement retailers have their own repurchase statute, which also reaches outdoor power equipment bought from their suppliers, covered under how the manufacturer’s repurchase obligation works.

If your line falls outside both statutes, the agreement and Minnesota’s Uniform Commercial Code apply, as explained on the page about terminating a distributor, along with any other statute that reaches the line. One is the repurchase statute for a retailer “engaged in the business of selling and retailing farm implements and repair parts for farm implements” that agrees with a “wholesaler, manufacturer, or distributor of farm implements, machinery, attachments or repair parts or outdoor power equipment, attachments, or repair parts” to keep a stock (Minn. Stat. § 325E.06, subd. 1). A truck dealer may also be covered by the motor vehicle dealer statute, whose rules are described under good cause, notice and cure, and new dealers and territory changes. A dealer agreement can also be a franchise; the test is covered on the page about what makes a business relationship a franchise. If you also sell a line on commission without buying it for resale, the Minnesota Termination of Sales Representatives Act is the statute to read for that line.

What Counts as Good Cause to End or Not Renew a Dealer Agreement?

Good cause is your failure to substantially comply with essential, reasonable requirements of the agreement that apply equally to similar dealers, or one of eight listed events. The heavy equipment statute provides that “No equipment manufacturer, directly or through an officer, agent, or employee may terminate, cancel, fail to renew, or substantially change the competitive circumstances of a dealership agreement without good cause” (Minn. Stat. § 325E.0681, subd. 1). It defines the term this way: “‘Good cause’ means failure by an equipment dealer to substantially comply with essential and reasonable requirements imposed upon the dealer by the dealership agreement, if the requirements are not different from those requirements imposed on other similarly situated dealers by their terms.” The farm statute uses the same words for a farm equipment dealer (Minn. Stat. § 325E.062, subd. 1).

The eight listed events in each statute are:

  1. a change in ownership or management without the manufacturer’s consent, which it may not withhold unreasonably, as the paragraph on a sale below describes;
  2. a bankruptcy petition, as the statute qualifies it in the next paragraph, a closeout or sale of a substantial part of the equipment business, or the start of dissolution or liquidation;
  3. moving the principal place of business without the manufacturer’s prior written approval;
  4. a default under a security agreement with the manufacturer, or revocation of a guarantee;
  5. failing to operate in the normal course of business, as the statute measures it in the next paragraph, or abandoning the business;
  6. a dealer that “has pleaded guilty to or has been convicted of a felony affecting the relationship between the dealer and manufacturer” (Minn. Stat. § 325E.0681, subd. 1; Minn. Stat. § 325E.062, subd. 1);
  7. conduct “injurious or detrimental to the dealer’s customers or to the public welfare”; and
  8. consistent failure to meet the manufacturer’s market penetration requirements after notice of them.

For items 2 and 5, the heavy equipment statute’s words are that the dealer “has filed a voluntary petition in bankruptcy or has had an involuntary petition in bankruptcy filed against it that has not been discharged within 30 days after the filing,” or “has failed to operate in the normal course of business for seven consecutive days or has otherwise abandoned the business” (Minn. Stat. § 325E.0681, subd. 1). The farm statute’s words are the same in substance. Check the current text of both statutes before relying on these bankruptcy and closure periods.

A sale of the dealership can fall under two different listed events. The first is a change made without consent that the manufacturer “shall not withhold consent unreasonably” to give (Minn. Stat. § 325E.0681, subd. 1, clause (a); Minn. Stat. § 325E.062, subd. 1, clause (1)). That event covers a transfer of an interest in the dealership, a withdrawal of “an individual proprietor, partner, major shareholder, or the manager of the dealership,” and a substantial reduction in a partner’s or major stockholder’s interest. A separate event has no consent limit: good cause exists whenever “there has been a closeout or sale of a substantial part of the dealer’s assets related to the equipment business” (Minn. Stat. § 325E.0681, subd. 1, clause (b)). The farm statute’s words are “related to the farm equipment business” (Minn. Stat. § 325E.062, subd. 1, clause (2)). Both events are among the first seven, so the notice and cure rights of these two statutes do not apply to them. I suggest getting the manufacturer’s written agreement to the sale before closing, because a sale on either ground can end the agreement without that notice.

A truck dealer that is a “new motor vehicle dealer” under chapter 80E (Minn. Stat. § 80E.03, subd. 3) has added rules for a sale. Chapter 80E lists “a change of ownership of the new motor vehicle dealer’s dealership” among circumstances “which do not by themselves constitute good cause for the termination, cancellation, or nonrenewal of a franchise,” and adds: “This paragraph does not authorize any change in ownership which would have the effect of the sale of the franchise without the manufacturer’s or distributor’s consent, but consent shall not in any case be unreasonably withheld. The burden of establishing the reasonableness is on the franchisor” (Minn. Stat. § 80E.07, subd. 1).

For that truck dealer, it is also an unfair practice to “prevent a new motor vehicle dealer from transferring or assigning a new motor vehicle dealership to a qualified transferee” (Minn. Stat. § 80E.13, clause (10)). The same clause provides: “There shall be no transfer, assignment of the franchise, or major change in the executive management of the dealership, except as is otherwise provided in sections 80E.01 to 80E.17, without consent of the manufacturer, which shall not be withheld without good cause.” The manufacturer “has the burden of proving that the transferee is a person who is not of good moral character or does not meet the franchisor’s existing and reasonable capital standards and, considering the volume of sales and service of the new motor vehicle dealer, reasonable business experience standards in the market area.” It continues: “Denial of the request must be in writing and delivered to the new motor vehicle dealer within 60 days after the manufacturer receives the completed application customarily used by the manufacturer, distributor, factory branch, or importer for dealer appointments. If a denial is not sent within this period, the manufacturer shall be deemed to have given its consent to the proposed transfer or change.” The manufacturer may instead “exercise a right of first refusal to acquire the franchisee’s assets or ownership” if every condition the clause lists is met. Those conditions include that the franchise agreement permits it, that the transfer “is of more than 50 percent of the ownership or assets,” that the manufacturer “notifies the dealer in writing within 60 days of its receipt of the complete written proposal for the proposed sale or transfer on forms generally utilized by the manufacturer, distributor, factory branch, or importer for such purposes and containing the information required therein and all documents and agreements relating to the proposed sale or transfer,” and that the dealer receives “the same or greater consideration with equivalent terms of sale as is provided in the documents and agreements submitted to the manufacturer, distributor, factory branch, or importer under item (iii).” They also exclude a sale to a family member the clause lists or to “a manager who has been employed in the dealership for at least four years and is otherwise qualified as a dealer operator,” and require the manufacturer to pay the buyer’s reasonable expenses. The clause then limits that payment: “payment of such expenses and attorney fees shall not be required if the dealer has not submitted or caused to be submitted an accounting of those expenses within 20 days after the dealer’s receipt of the manufacturer, distributor, factory branch, or importer’s written request for such an accounting.” The manufacturer “may request such an accounting before exercising its right of first refusal.” Check the current text of section 80E.13 before relying on these periods.

In River Valley Truck Center, Inc. v. Interstate Companies, 704 N.W.2d 154 (Minn. 2005), the Minnesota Supreme Court held that a distributor had good cause not to renew an engine dealership. Section 2.2.1 of the dealership agreements required the dealer to “actively and effectively promote the sale” of the distributor’s engines. The dealer’s truck manufacturer had stopped offering that engine, so the dealer could no longer promote it in new trucks. The court reasoned that the dealer’s ability to meet “some other essential requirements” did not “eliminate good cause for nonrenewal if it cannot comply with this essential requirement.” Three of the seven justices dissented.

How Do the Notice and Cure Rules Work?

Unless the ground is one of the first seven listed events, the manufacturer must give “at least 90 days’ prior written notice of termination, cancellation, or nonrenewal of the dealership agreement” (Minn. Stat. § 325E.0681, subd. 2). The notice “must state all reasons constituting good cause for the action and must provide that the dealer has until expiration of the notice period in which to cure a claimed deficiency. If the deficiency is rectified within the notice period, the notice is void.” The farm statute’s cure window is set in days: the notice “shall state all reasons constituting good cause for the action and shall provide that the dealer has 60 days in which to cure any claimed deficiency. If the deficiency is rectified within 60 days, the notice is void” (Minn. Stat. § 325E.062, subd. 2). Check the current text of both statutes before relying on these notice and cure periods.

Notice and cure do not cover every ground. Under the farm statute, “The notice and right to cure provisions under this section do not apply if the reason for termination, cancellation, or nonrenewal is for any reason set forth in subdivision 1, clauses (1) to (7)” (Minn. Stat. § 325E.062, subd. 2). The heavy equipment statute says the same of “clauses (a) to (g)” (Minn. Stat. § 325E.0681, subd. 2). Those clauses are the first seven listed events, so a termination for a general failure to comply, or for missed market penetration requirements, keeps the notice and cure rights.

A truck dealer that is a “new motor vehicle dealer” under chapter 80E gets notice on every ground. “Notwithstanding the terms of any franchise agreement or waiver to the contrary,” the manufacturer must give notice before any termination, cancellation, or nonrenewal (Minn. Stat. § 80E.08, subd. 1). That notice “shall be in writing and except as provided in subdivision 3 shall be given not less than 90 days prior to the effective date of the termination, cancellation, or nonrenewal” (Minn. Stat. § 80E.08, subd. 2). Under subdivision 3, “At least 15 days’ notice must be provided” for the circumstances it lists, such as a felony conviction, certain business closings, a significant misrepresentation, or loss of the dealer’s license. “Not less than 180 days’ notice must be provided prior to the effective date of cancellation, termination, or nonrenewal where the manufacturer or distributor is discontinuing the sale of the product line” (Minn. Stat. § 80E.08, subd. 3). Check the current text of section 80E.08 before relying on these notice periods.

A market penetration ground has its own condition: the dealer must have failed “after receiving notice from the manufacturer of its requirements for reasonable market penetration based on the manufacturer’s experience in other comparable marketing areas,” and must “consistently” fail to meet them (Minn. Stat. § 325E.062, subd. 1). In Wadena Implement Co. v. Deere & Co., 480 N.W.2d 383 (Minn. App. 1992), a farm dealer’s market share requirement was first stated in letters during the year it measured. The court of appeals adopted the trial court’s words: “If a specific market share is to be required for a particular year, elementary notions of fairness would dictate that the dealer unambiguously be informed of the requirement before the year begins.” Because the manufacturer compiled its data yearly, it “would have to show at a minimum that Wadena Implement substantially failed to comply with its market share requirements two years in a row.” The court also held the notice defective, although it met the day counts, because the cure it demanded was impossible.

When Does a New Dealer or Territory Change Need Good Cause?

A manufacturer needs good cause to “substantially change the competitive circumstances of a dealership agreement,” the same as for a termination (Minn. Stat. § 325E.0681, subd. 1; Minn. Stat. § 325E.062, subd. 1). The notice and cure subdivisions of those statutes name only “termination, cancellation, or nonrenewal” (Minn. Stat. § 325E.0681, subd. 2; Minn. Stat. § 325E.062, subd. 2). For that reason, I suggest acting on a planned new dealer as soon as you learn of it rather than waiting for a notice. In Astleford Equipment Co. v. Navistar International Transportation Corp., 632 N.W.2d 182 (Minn. 2001), an International truck dealership challenged the manufacturer’s plan to approve another dealership of the same brand within 10 miles. The Minnesota Supreme Court rejected a rule that only a constructive termination counts. It held that “a substantial change in competitive circumstances is a change that has a substantially adverse although not necessarily lethal effect on the dealership. It is a change that is material to the continued existence of the dealership, one that significantly diminishes its viability, its ability to maintain a reasonable profit over the long term or to stay in business.”

The same opinion set the limit on the other side: “the statute cannot be read to protect a dealer from nearly all new competition that threatens the dealer’s profits.” The parties in that case had agreed that good cause was not at issue, and the court sent the case back for the trial court to apply the standard to its findings. If you face a new same-brand dealer nearby, the evidence the trial court weighed there is a useful checklist. It included how far customers travel for parts and service, the share of profit from parts and service, and the share of that business located closer to the new site.

A truck dealer that is a “new motor vehicle dealer” under Minnesota’s Motor Vehicle Sale and Distribution Act (Minn. Stat. § 80E.03, subd. 3) has a second rule for this event. A manufacturer adding or relocating a dealership where the line make is represented “shall, in writing, first notify each new motor vehicle dealer in this line make in the relevant market area,” and “The relevant market area is a radius of ten miles around an existing dealership” (Minn. Stat. § 80E.14, subd. 1). The same subdivision provides: “Within 30 days of receiving the notice or within 30 days after the end of any appeal procedure provided by the manufacturer, the new motor vehicle dealership may commence a civil action in a court of competent jurisdiction pursuant to section 80E.17 challenging the establishing or relocating of the new motor vehicle dealership.” The manufacturer then “shall not establish or relocate the proposed new motor vehicle dealership unless the court has determined that there is good cause for permitting the establishment or relocation of the motor vehicle dealership.” The subdivision excepts some good-faith reopenings of a former same-line location and some short relocations. Check the current text of section 80E.14 before relying on these notice and filing periods.

Chapter 80E also governs a change to that truck dealer’s territory. It is “unlawful and an unfair practice” for a manufacturer to “assign or change a dealer’s area of sales effectiveness arbitrarily or without due regard to the present pattern of motor vehicle sales and registrations within the dealer’s market. The manufacturer, distributor, or factory branch must provide at least 90 days’ notice of the proposed change. The change may not take effect if the dealer commences a civil action within the 90 days’ notice period to determine whether the manufacturer, distributor, or factory branch met its obligations under this section. The burden of proof in such an action shall be on the manufacturer or distributor” (Minn. Stat. § 80E.13, clause (16)). The area of sales effectiveness is “a geographic area designated in a franchise agreement or related document where a new motor vehicle dealer is responsible for effectively selling, servicing, and otherwise representing the products of the manufacturer, distributor, or factory branch” (Minn. Stat. § 80E.03, subd. 10b). Check the current text of section 80E.13 before relying on this notice and filing period.

What Manufacturer Practices Do the Statutes Prohibit?

Beyond termination, each statute lists conduct that is itself a violation. Under the heavy equipment statute, it is a violation “for an equipment manufacturer to coerce an equipment dealer to accept delivery of heavy and utility equipment that the equipment dealer has not voluntarily ordered” (Minn. Stat. § 325E.0682). The farm statute has the same rule (Minn. Stat. § 325E.063). Both statutes also bar a manufacturer from:

  • conditioning a sale on your purchase of other goods or services, except that it may require “all parts reasonably necessary to maintain the quality of operation in the field” of equipment used in your trade area and the telecommunications needed to communicate with it (Minn. Stat. § 325E.0682);
  • coercing you into a refusal to buy another manufacturer’s equipment;
  • charging different prices to similarly situated dealers for equipment of like grade and quality, except for differences that make “only due allowance” for cost or for the method or quantity of sale (Minn. Stat. § 325E.0682); and
  • attempting or threatening to end or substantially change your dealership “based on the results of a natural disaster, a labor dispute, or other circumstance beyond the dealer’s control” (Minn. Stat. § 325E.0682). The farm version adds “including a sustained drought in the dealership market area” (Minn. Stat. § 325E.063).

In River Valley, the Minnesota Supreme Court rejected the dealer’s reliance on the “other circumstance” words for two reasons. It read those words narrowly, to cover a dealer’s “temporary inability to perform, such as that caused by a natural disaster.” It also agreed with the court of appeals that the dealer’s noncompliance “was not beyond its control because it could have cured its noncompliance by discontinuing its representation of International and/or establishing a relationship with another manufacturer that can accommodate Detroit Diesel engines.” A permanent change by a third party, such as a supplier dropping a product, did not qualify there.

Why Do Waivers and Choice-of-Law Clauses Not Remove These Rights?

A term that conflicts with either statute is void, including a clause choosing another state’s law. The farm statute provides: “A term of a dealership agreement either expressed or implied, including a choice of law provision, which is inconsistent with the terms of sections 325E.061 to 325E.065 or that purports to waive a farm equipment manufacturer’s compliance with sections 325E.061 to 325E.065 is void and unenforceable and does not waive any rights which are provided to a person by sections 325E.061 to 325E.065” (Minn. Stat. § 325E.064). The heavy equipment statute says the same for “sections 325E.068 to 325E.0684” (Minn. Stat. § 325E.0683).

For a covered agreement, a clause letting the manufacturer end the agreement at will does not reduce the rules in those sections. Neither does a short notice clause or a waiver signed with a new program agreement. The agreement still matters for anything the statutes do not address, such as territory definitions and performance standards. Those terms can become the “essential and reasonable requirements” a good-cause claim is measured against (Minn. Stat. § 325E.0681, subd. 1).

How Does the Manufacturer’s Repurchase Obligation Work?

When a heavy equipment dealer agreement ends, the manufacturer must buy back or credit “100 percent of the net cost of all unused heavy and utility equipment in new condition that has been purchased by the dealer from the manufacturer within the 24 months immediately preceding notification by either party of intent to terminate, cancel, or discontinue the agreement” (Minn. Stat. § 325E.0681, subd. 3). A farm implement dealer has a parallel rule if it agreed with its supplier “to maintain a stock of parts or complete or whole machines, or attachments” (Minn. Stat. § 325E.06, subd. 1). That supplier must pay, “unless the retailer should desire and has a contractual right to keep such merchandise, a sum equal to 100 percent of the net cost of all unused complete farm implements, machinery, and attachments or outdoor power equipment and attachments in new condition which have been purchased by the retailer from the wholesaler, manufacturer, or distributor within the 24 months immediately preceding notification by either party of intent to terminate, cancel, or discontinue the contract” (Minn. Stat. § 325E.06, subd. 1). Check the current text of the statute before relying on these periods.

The heavy equipment amount “must include transportation and reasonable assembly charges that have been paid by the dealer, or invoiced to the dealer’s account by the manufacturer” (Minn. Stat. § 325E.0681, subd. 3). Both statutes also cover parts, hardware, software, tools, and signage. Under the heavy equipment statute, repair parts come back at “95 percent of the current net prices on repair parts, including superseded parts listed in current price lists or catalogs in use by the manufacturer on the date of the termination, cancellation, or discontinuance of the agreement” (Minn. Stat. § 325E.0681, subd. 4). Other rates apply to unlisted parts, required computer hardware and software, specialized repair tools, signage, and handling. The farm implement statute defines “farm implements” to “mean every vehicle designed or adapted and used exclusively for agricultural operations and only incidentally operated or used upon the highways” (Minn. Stat. § 325E.06, subd. 6).

Several limits shape the heavy equipment claim. “The dealer may elect to keep the merchandise instead of receiving payment, if the contract gives the dealer this right” (Minn. Stat. § 325E.0681, subd. 3). The statute “does not affect any security interest that the manufacturer may have in the inventory of the dealer” (Minn. Stat. § 325E.0681, subd. 4). And certain parts are excluded, including “repair parts that were marked nonreturnable or future nonreturnable when the retailer ordered them,” and parts that need reconditioning (Minn. Stat. § 325E.0681, subd. 12). The statute also excludes a part you failed to return after being offered a reasonable opportunity to return it at the prices the subdivision sets. That exclusion applies unless you have delivered the parts to an escrow agent (Minn. Stat. § 325E.0681, subd. 12). The farm implement statute excludes the same categories of parts (Minn. Stat. § 325E.06, subd. 5). The duty applies whichever side ends the relationship, a point the page on a distributor that ends a supplier’s line covers from the supplier’s side.

How Do You Claim the Repurchase Payment?

You claim it either by returning the goods or by sending a sworn list and letting the manufacturer inspect them where they sit. “The notice of the dealer’s intention to return must be in writing, sworn to before a notary public as to the accuracy of the listing of heavy and utility equipment and that all of the items are in usable condition” (Minn. Stat. § 325E.0681, subd. 6). It must name who holds the goods, where they can be inspected, and an escrow agent with authority to accept payment and release the goods. “The notice constitutes the appointment of the escrow agent to act on the dealer’s behalf” (Minn. Stat. § 325E.0681, subd. 6).

The statute then runs on fixed steps. First, “The manufacturer has 30 days from the date of the mailing of the notice under subdivision 6, which must be by certified mail, in which to inspect the heavy and utility equipment and verify the accuracy of the dealer’s list” (Minn. Stat. § 325E.0681, subd. 7). Next, the manufacturer must act “within ten days after inspection” (Minn. Stat. § 325E.0681, subd. 7). It must pay the escrow agent, show a credit to your account if you owe it money, or send a “dummy credit list” and shipping labels with payment for the acceptable returns (Minn. Stat. § 325E.0681, subds. 7 and 8). Once the manufacturer receives the goods, the escrow agent must “disburse 90 percent of the payment it has received, less its actual expenses and a reasonable fee for its services, to the dealer” and hold the rest until the nonreturnables are settled (Minn. Stat. § 325E.0681, subd. 8). “If no agreement is reached in a reasonable time, the escrow agent may refer the matter to an arbitrator who has authority to resolve all unsettled issues in the dispute” (Minn. Stat. § 325E.0681, subd. 8). Finally, “Payment required to be made under this section must be made not later than 60 days from the date the heavy and utility equipment is received by the manufacturer, and if not by then paid, the amount payable by the manufacturer bears interest at the maximum rate allowed by law from the date the agreement was terminated, canceled, or discontinued until the date payment is received by the dealer” (Minn. Stat. § 325E.0681, subd. 5). The farm implement statute uses the same sequence, with “30 days from the date of the mailing of the notice, which shall be by certified mail” for inspection (Minn. Stat. § 325E.06, subd. 1). Check the current text of each section before relying on these inspection and payment periods.

For a farm equipment dealer, a warranty claim for work done before termination runs separately: the manufacturer “shall approve or disapprove the claim within 30 days of receipt” (Minn. Stat. § 325E.0631, subd. 3), where the dealer “has complied with the reasonable policies and procedures contained in the farm equipment manufacturer’s warranty” (Minn. Stat. § 325E.0631, subd. 1). A written agreement can displace that rule: “A dealer may choose to accept alternate reimbursement terms and conditions in lieu of the requirements of subdivisions 2 to 7, provided there is a written dealer agreement between the farm equipment manufacturer and the dealer providing for compensation to the dealer for warranty labor costs either as: (1) a discount in the pricing of the equipment to the dealer; or (2) a lump-sum payment to the dealer. The discount or lump sum must be no less than five percent of the suggested retail price of the equipment. If the requirements of this subdivision are met and alternate terms and conditions are in place, subdivisions 2 to 7 do not apply and the alternate terms and conditions are enforceable” (Minn. Stat. § 325E.0631, subd. 8). Check the current text of section 325E.0631 before relying on these warranty periods.

The statutory route supplements your contract. “The dealer may elect to pursue either the dealer’s contract remedy or the remedy provided in this section” (Minn. Stat. § 325E.0681, subd. 9), and choosing the contract route keeps the statutory route for goods the contract remedy does not affect. The same subdivision preserves the manufacturer’s right to charge back discounts it gave you on your purchases. If the dealer or a majority stockholder dies and the heirs do not agree to continue the dealership, the manufacturer must “repurchase the merchandise from the heir or heirs upon the same terms and conditions as are otherwise provided in this section” (Minn. Stat. § 325E.0681, subd. 10; Minn. Stat. § 325E.06, subd. 3 for farm implements).

What Remedies Does a Dealer Have Against a Manufacturer?

For a violation of the farm or heavy equipment dealer sections, a dealer may sue for damages, the actual costs of the action, and reasonable attorney’s fees. The dealer may also ask a court to stop an unlawful termination, cancellation, nonrenewal, or substantial change of competitive circumstances. An order before trial in a Minnesota state court requires the dealer to give security in an amount the court sets (Minn. R. Civ. P. 65.03). Under the farm statute, “a farm equipment dealer may bring an action against the manufacturer in a court of competent jurisdiction for damages sustained by the dealer as a consequence of the manufacturer’s violation, together with the actual costs of the action, including reasonable attorney’s fees, and the dealer also may be granted injunctive relief against unlawful termination, cancellation, nonrenewal, or substantial change of competitive circumstances. The remedies in this section are in addition to any other remedies permitted by law” (Minn. Stat. § 325E.065). The heavy equipment statute gives the same remedies (Minn. Stat. § 325E.0684).

In Wadena, the court of appeals affirmed a permanent injunction barring the manufacturer from using the dealer’s 1989 market share as a ground for termination, and affirmed the dealer’s attorney fee award. When a manufacturer fails or refuses to pay a repurchase amount the section requires, the statute provides that “the manufacturer is liable in a civil action to be brought by the dealer or the dealer’s heir or heirs” for the amounts it lists (Minn. Stat. § 325E.0681, subd. 11). The farm implement statute makes a supplier that fails to pay as required, “upon the cancellation of a contract by either a retailer or such manufacturer, wholesaler, or distributor,” liable “in a civil action to be brought by the retailer or the retailer’s heir or heirs for (a) 100 percent of the net cost of the farm implements, machinery, and attachments, (b) transportation charges and reasonable assembly which have been paid by the retailer, (c) 95 percent of the current net price of repair parts, 100 percent of invoiced prices and 50 percent of the price of all other parts as provided in subdivision 1, and (d) five percent for handling, packing and loading, if applicable” (Minn. Stat. § 325E.06, subd. 4). Section 325E.06 has no attorney’s fee provision of its own. The fee provisions quoted above apply when a manufacturer “violates sections 325E.061 to 325E.065” (Minn. Stat. § 325E.065) or “violates sections 325E.068 to 325E.0684” (Minn. Stat. § 325E.0684), and neither range includes section 325E.06.

What Are a Dealer’s Options When a Manufacturer Moves Against the Dealership?

You have several paths, and the right one depends on whether you want to keep the line, sell the business, or leave on the best terms.

  1. Talk with the manufacturer’s decision makers. This fits when the dispute is a performance target, a facility standard, or a new dealer nearby, and the relationship still has value to both sides. If you have received a notice of termination, cancellation, or nonrenewal, the statute requires it to “state all reasons constituting good cause for the action” (Minn. Stat. § 325E.0681, subd. 2; Minn. Stat. § 325E.062, subd. 2). You can propose a plan against those reasons. The risk is informal promises that never reach writing, so I suggest confirming any agreed plan by letter.
  2. Cure the claimed deficiency. This fits a general compliance or market penetration ground, under the rules explained in how the notice and cure rules work. The risk is a cure the manufacturer later says fell short, so I suggest documenting each step against the reasons the notice lists.
  3. Sell or transfer the dealership with consent. This fits an owner ready to exit while the business has value. Under the farm and heavy equipment statutes, the manufacturer may not withhold consent unreasonably to a transfer of an interest. A closeout or sale of a substantial part of the dealer’s equipment business assets is a separate listed ground with no consent limit, and neither ground gets notice or cure. A truck dealer under the motor vehicle dealer statute has the different consent, notice, and right-of-first-refusal rules quoted under what counts as good cause.
  4. Negotiate the exit and the repurchase. This fits when ending the relationship is acceptable but the price is not. You can pursue the contract terms and still keep the statutory repurchase route for goods the contract remedy does not affect.
  5. Sue for an injunction and damages. This fits when the manufacturer acts without good cause or proper notice and the dealership is worth protecting. The risk is cost and time. To stop the termination before trial, a Minnesota state court requires security: “No temporary restraining order or temporary injunction shall be granted except upon the giving of security by the applicant, in such sum as the court deems proper, for the payment of such costs and damages as may be incurred or suffered by any party who is found to have been wrongfully enjoined or restrained” (Minn. R. Civ. P. 65.03). A dealer who proves a violation of the farm or heavy equipment dealer sections may recover the actual costs of the action, including reasonable attorney’s fees, after winning.
Does a handshake deal with my manufacturer get the same protection?

Yes. Both Minnesota dealer statutes define a dealership agreement as “an oral or written agreement of definite or indefinite duration” (Minn. Stat. § 325E.061, subd. 5, for farm equipment; Minn. Stat. § 325E.068, subd. 5, for heavy and utility equipment). An unwritten arrangement under which you buy equipment from the manufacturer and resell it gets the same good-cause, notice, and remedy rules. Proving its terms is harder, so I suggest keeping the manufacturer’s letters, program announcements, and invoices that show what it required of you.

Can the manufacturer block the sale of my dealership to a buyer I choose?

It depends on how the sale is made. Under both dealer statutes, a transfer of an interest without consent is good cause, but the manufacturer “shall not withhold consent unreasonably” (Minn. Stat. § 325E.0681, subd. 1; Minn. Stat. § 325E.062, subd. 1). A closeout or sale of a substantial part of the dealer’s equipment business assets is a separate ground with no consent limit. Neither ground gets notice or cure. A truck dealer under the motor vehicle dealer statute has different rules; What Counts as Good Cause to End or Not Renew a Dealer Agreement? quotes each one.

Can my agreement's choice of another state's law take away these rights?

No. Each statute provides that a term inconsistent with it, “including a choice of law provision,” is “void and unenforceable” and does not waive the rights the statute gives (Minn. Stat. § 325E.064; Minn. Stat. § 325E.0683). So a choice-of-law clause or signed waiver does not remove those sections’ good-cause, notice, remedy, or heavy equipment repurchase rules. The separate farm implement buyback statute says instead that it “shall be supplemental to any agreement between the retailer and the manufacturer, wholesaler or distributor covering the return of farm implements, machinery, attachments and repair parts” (Minn. Stat. § 325E.06, subd. 2).

Do I lose the buyback if I am the one who ends the agreement?

No. The heavy equipment repurchase duty applies “If a dealership agreement is terminated, canceled, or discontinued,” and it measures its lookback period from “notification by either party” (Minn. Stat. § 325E.0681, subd. 3). For a farm implement retailer, the separate buyback statute makes a supplier that fails to pay liable after cancellation “by either a retailer or such manufacturer, wholesaler, or distributor” (Minn. Stat. § 325E.06, subd. 4). The statutes’ exclusions and the claim procedure still apply.

Will the manufacturer still have to pay warranty claims after termination?

For a farm equipment dealer, the manufacturer must act on them unless the dealer accepted alternate terms. For warranty work done before termination, the manufacturer “shall approve or disapprove the claim within 30 days of receipt” (Minn. Stat. § 325E.0631, subd. 3), where the dealer “has complied with the reasonable policies and procedures contained in the farm equipment manufacturer’s warranty” (subd. 1). Under subdivision 8, if the dealer accepts a written dealer agreement paying warranty labor as a discount or lump sum of at least 5% of the equipment’s suggested retail price, “subdivisions 2 to 7 do not apply.” Check the current text of the statute before relying on these periods. The heavy equipment sections contain no warranty-claim section.

Can I recover my attorney's fees if the manufacturer broke the statute?

Yes, if you prove a violation of the farm or heavy equipment dealer sections. If a manufacturer “violates sections 325E.061 to 325E.065” or “violates sections 325E.068 to 325E.0684,” the dealer may recover “damages sustained by the dealer as a consequence of the manufacturer’s violation, together with the actual costs of the action, including reasonable attorney’s fees” (Minn. Stat. § 325E.065; Minn. Stat. § 325E.0684). The farm implement buyback statute, Minn. Stat. § 325E.06, has no fee provision; its civil action covers the amounts in subdivision 4. In Wadena Implement Co. v. Deere & Co., 480 N.W.2d 383 (Minn. App. 1992), the court held that a dealership “may be awarded attorney fees” under the farm act where it has proven a violation by the manufacturer.

Minnesota Equipment Dealer Agreements

Minnesota’s farm and heavy equipment dealer statutes add good cause, notice and cure, a ban on certain pressure tactics, and fee recovery to your dealer agreement, plus repurchase rights for a heavy equipment dealer. A contrary clause does not remove the rights those statutes give. A farm implement retailer’s separate buyback statute is “supplemental to any agreement” covering returns (Minn. Stat. § 325E.06, subd. 2). Reading the notice, the agreement, and the statute side by side shows which ground the manufacturer claims and what you can still do about it. These statutes sit within the broader rules of Minnesota business contract law. If a manufacturer has sent you a termination, nonrenewal, or territory notice, email [email protected] with a brief description. I can start an intake and conflict check before you send any confidential documents.